Installing / Plugging in your USB Flash Drive          Home Page     USB Flash Drive Page

(Also see: Using your USB Flash Drive, and Removing your USB Flash Drive)
Created by: Christopher Gizara - Technology Club President (2003-2006)

To begin to use your USB Flash Drive with your GX260, GX240, or any similar looking
Dell Computer, proceed to do the following.
(USB Flash Drives work with any computer)

1. Remove any caps and/or covers from the USB Flash Drive, if any are present.
    
2. Open the front cover on the front of the Dell, as shown below.
    
    
3. Plug in your USB Flash Drive, as shown below.
   (On District computers, the computer should be able to install all required drivers automatically. This may
   take a few minutes depending on your computer. There may even be a picture such as the following:
   
    You may need to go through the installation process. Just
   click "Next", "OK", or similar buttons. There will be no need to change any of the preset settings.)
   
    
4. For those who have white Dells, such as the GX1 or the GX100, plug in the USB Flash Drive in the back.
   You may do this with the GX240s, GX260s, or similar looking device, as shown below.
   

          (Also see: Using your USB Flash Drive, and Removing your USB Flash Drive)